This is's cache of It is a snapshot of the page as it appeared on 2009-03-19T03:00:00.

Asus Rampage II Gene

You'd need a heart of stone to avoid being won over by the looks of the Asus Rampage II Gene. This X58 motherboard uses a MicroATX form factor and is packaged in a square box. Lift the lid and the Gene is displayed under a plastic clear cover with the manual, cables and other extras all tucked out of sight underneath. The initial impression is of a smaller, cuter version of the Rampage II Extreme.

As you can see from the photos the PCB is dark brown and the coolers are matt black with a red Republic of Gamers logo and the incredibly funky micro buttons that we first saw on Rampage II Extreme are also present.

Being a MicroATX board, it measures 244mm x 244mm which is 61mm shorter than a regular ATX motherboard at 305mm x 244mm. To put it another way the change in form factor has given Asus a 20 percent reduction in the surface area of the board so you might expect that the list of features has been cut to the bone. Not so.

The Rampage II Extreme has triple graphics slots (16x8x8x) which are reduced to a pair of x16 slots on the Gene but you get full support for CrossFireX and SLI. The other change is a move from dual Gigabit LAN on the Extreme and a single Gigabit port on the Gene. In terms of ports and connectors the two models of Rampage II are very similar with six USB 2.0 ports and one Firewire ports. The Gene doesn't include a bracket with extra ports whereas the Rampage II Extreme has two more USB and a second Firewire on a bracket.

Very few people have a need for three graphics cards and a second Gigabit LAN port is similarly unnecessary for most, so it is highly likely that the Gene offers a list of features that will be perfectly adequate for your new Core i7 PC despite the small size of the board. The question is why anyone would choose a MicroATX motherboard over a cheaper full size board. Well you might simply want to use a smaller PC case but all of the MicroATX cases we are aware of are designed for Media Centre duties with the possible exception of the Antec Solo Quiet Mini Tower.

We asked Asus about the thinking behind a MicroATX X58 motherboard and were told that mini towers are very popular among LAN party gamers in South East Asia. That may well be true but they seem to be completely unknown in the UK so the odds are that you will be installing the Gene in a regular tower case.

One obvious benefit of the smaller motherboard is the question of cost. The Gene is very reasonable compared to the Extreme as it is a full £100 cheaper however it is £50 more expensive than the MSI X58 Pro, and sits between the EVGA X58 SLI and Gigabyte GA-EX58-UD4P in terms of cost.

Go to page 2: Asus Rampage II Gene

Latest Deals From Ebay

  1. ➨➨➨ "Used" ASUS Rampage II Gene LGA 1366 ATX Motherboard I/O Shield ➨➨➨

    $16.99 View Item
  2. Asus Rampage II Gene LGA 1366 Micro ATX Motherboard

    $260.00 View Item
  3. ASUS Essentio RAMPAGE II GENE/CG5290/DP_MB Socket 1366 Intel X58 MotherBoard

    $218.00 View Item

    $13.45 View Item
  5. ASUS Rampage II Gene X58 LGA 1366 DDR3 Motherboard *ONLY* BOX and ACCESSORIES

    $32.00 View Item

Read Comments


March 19, 2009, 10:31 pm

But when will etailers start listing them? I've only seen it on a few sites, and would rather buy from a trusted etailer newegg, or zzf :|


March 20, 2009, 1:53 am

I like how the X-fi is built into the I/O panel unlike the Rampage II Extreme makes it far more tidy


March 20, 2009, 8:37 pm

I know that technology trailblazers pay a steep price but when you consider I just put a Q6600 in an Asus motherboard costing 㿏 that runs at 3.2Ghz stock voltage and 3.6Ghz easily I do feel these latest motherboards are ridiculously overpriced for the tiny increase in real world performance they yield.

Not to mention the i7 processor.


March 20, 2009, 9:36 pm

@ basicasic - That's an apples to oranges comparison really because the X58 chipset is high-end in the same way X48 is for 775 motherboards, almost all of which are the same price as X58 boards (𧵘+). They all support SLI and Crossfire as well as DDR3, all of which you have to pay more for if you want that with your Q6600. Intel just made sure all the expensive kit was released first to make those with enough money to upgrade pay through the nose for it. Besides, I'd never even think of pairing a 𧵘 processor with a 㿏 motherboard in the first place.

Wait until the summer when you can get yourself the more mainstream i5 and P55 motherboard, so that Nehalem upgrade won't seem so expensive.


March 20, 2009, 11:54 pm

I build systems for a living. I get to play with plenty of kit. You may scoff at a 㿏 motherboard and a Q6600 cpu but for a customer after performance on a limited budget its the bargain of the century. Stick in a decent graphics card and in a blind test you wouldn't be able to tell the difference between that and an X58/i7 system.

My main point is that never has there been such a huge discrepancy in price between high-end and mainstream kit for such a small gain in performance and features. No doubt as a result of lack of competition at the high-end.


March 22, 2009, 2:13 am

more room for water cooling?

comments powered by Disqus